Deep End Pools – Swimming Pool Liner Designs
25th January 2017


Deep End Pools have been installing liners for well over 16 years and within this time there have been many progressions with the swimming pool liner industry.

We are proud installers of Aquaflex Swimming Pool Liners which we would say are possibly the best quality available to us here in the UK.  Aquaflex have been seen as the market leader in the swimming pool liner industry for many years.  They have a massive 22,000 sq. ft factory, situated in Salisbury, Wiltshire.

Bag Liners

Aquaflex have revolutionised what can be done with a pre-tailored pool liner. Gone are the days when anything out of the ordinary was deemed impossible.

Aquaflex are pioneered the incorporation of lined steps into pre-tailored liners. The benefits are enormous, for both renovating old pools and incorporating into new pools where a less expensive option than a fibreglass or acrylic step is needed. Matching the colour of the liner to the colour of the step ceases to be a problem.

Almost any size and shape of step can be lined in this way, as long as clear and accurate drawings are supplied. The only stipulation is that there must be an absolute minimum of 6″ (0.15m) of water covering the top step in order to prevent movement of the liner. The sketches below give an idea of the selection of step designs that is possible. Step edges should be finished with a very small “pencil” radius to prevent sharp edges and sand bags or other ballast should be used during filling to help keep the liner in position.

Liner Choices

Our Liner Selection for 2017

The Liner colours as seen in the above photo can be complemented with a Decorative Tileband from the below selection.

Tileband Colours

Tileband Options for 2017

Onsite Liners

When it comes to negotiating tight corners, complicated shapes and unusual sizes, the Alkorplan pool lining system by Aquaflex offers the ultimate in flexibility.

A lining system is ideal for both commercial and residential pools – and comes into its own particularly on renovation and refurbishment sites.

Alkorplan’s main selling point is its exceptional strength. The material which incorporates a polyester reinforced mesh is 1.5 mm thick which enables it to withstand intensive use and severe knocks from even the most enthusiastic swimmers. It also has a special formula that includes a UV stabilising treatment which can withstand exposure to all extremes of weather, retaining its properties year after year.

Guaranteed for ten years, with a life expectancy nearer 15 to 20 years, Aquaflex’s Alkorplan pool lining system can be used on new or existing constructions including concrete, cement render, brick or block, steel or aluminium, timber or fibreglass builds. Alkorplan is ready for installation in any swimming pool irrespective of shape; rectangle, oval, kidney, circular, trapezoidal, completely irregular, with or without lined steps etc.

Alkorplan lined swimming pools can be comfortably run at temperatures up to 33ºC (91ºF) without any detrimental effect on the expected life of the lining. Even at temperatures up to 35ºC (95ºF) the lining will give many years of service and is still covered by a more limited 5 year guarantee.

Step Lining

Lined Steps

Faded or Damaged Steps can be lined over to give them a new lease of life.

Liner step sections can be incorporated into a pre-tailored liner.

Aquaflex has revolutionised what can be done with a pool liner. Gone are the days when anything out of the ordinary was deemed impossible.

Aquaflex has pioneered the incorporation of lined steps into a pre-tailored liner. The benefits are enormous, for renovating old and new pools where a less expensive option than a fibreglass or acrylic step is desired. Moreover the problem of matching the colour of the liner to the colour of the step disappears.

Almost any size and shape of step can be lined in this way, as long as clear and accurate drawings are supplied. The only stipulation is that there must be an absolute minimum of 6″ (0.15m) of water covering the top step in order to prevent movement of the liner. The sketches below give an idea of the selection of step designs that is possible. Step edges should be finished with a very small “pencil” radius to prevent sharp edges and sand bags or other ballast should be used during filling to help keep the liner in position.

Anti-slip

1mm Anti Slip Material for step treads, Diving Blocks and Shallow areas of the pool.
The material conforms to the European Standard EN 13451 -1 and achieves the highest safety classification (Class C) for slip resistance. For incorporation into pretailored pool liners.

Colours available: White, Ice Blue, Blue, Sand, Light Grey and Dark Grey

Motifs

Why not make your pool liner a little bit special by adding a printed motif. Just supply us with the artwork or, if you have something in mind, like the seahorses shown here, just give us a call to discuss it.

Simpler motifs, such as the ones shown below can be welded onto your liner. We have a few motifs already here. However, any simple design can be accommodated. Please note that the standard motifs shown vary in size between approximately 5′ (1.52m) long for the turtle, and approximately 7′ (2.15m) long for the dolphin. Other designs avaible on request.

Deep End Pools is a trading name of CAW (Group) Limited registered in UK number 08775435. GB VAT Number 176900686