Swimming pool running costs are a major issue. It is always the ongoing costs once the pool is constructed that will affect you the most. Yes you have used the most efficient solar cover and a super efficient swimming pool air source heat pump but a lot of people forget about the heart of a swimming pool the circulation pump.

Certikin International today 28^th January 2010 unveiled their newest swimming pool circulation pump to their range the BOMBA HGS Dual Speed.

This new Bomba HGS  Dual speed has two speed settings allowing for maximum efficiency for you and your swimming pool.

There is a high speed setting for Backwashing, Rinse, Shock Treatments and intensive pool use.

The lower setting is ideal for normal circulation, water passes through filter much slower thus giving it a better filter. Energy saving as the pump in the slower speed setting is up to 60% more efficient than a one speed pump.

Better chemical distribution as the pool is getting a much more varied circulation of water. One of the major benefits of the pump in slower speed is that it is almost silent, this is ideal for those of us with plant rooms near the house or very close to a boundary.

The pump running at a varied speed is said to save some swimming pool owners in the region of £500+ a year on reduced running costs.

This pump is a much cheaper alternative to the Pentair Inteliflow.

The BOMBAS HGS Dual Speed will very shortly be available to purchase from us.

Deep End Pools 01494 681835 sales@deependpools.co.uk

A Swimming Pool Pump, Such as Sta Rite 5p2r or Pentair Swimmey, is the heart of any swimming pool. A good pump will ensure you get through season after season with minimal fuss. The pump is vital to your filtration set up so when it comes to installing a new one please make sure to take time and read the instructions. If you are not 100% confident then call Deep End Pools to install the pump for you.

Below is an overview of installing a pump, Make sure to fully read and understand the instructions prior to any works.

Pump fitting can be a very delicate thing, often costly when not taking care during the installation process.

Remove the pump and all packaging from the box locate the instructions and retain, mark on the instructions the date you have chosen to install the pump this makes good reference. If your plant room is below the water level of the pool be sure all relevant isolators are moved to the closed position.

Remove the existing pump from its location being sure that an electrician has isolated the power safely remove any interconnecting pipe work from the pump and put to one side this may prove helpful if your pump is a like for like change.

Ideally you would fit unions before and after the pump for ease of future removal, glue part threaded unions are ideal for the Sta Rite 52PR however your new pump may have unions fitted to the pump from standard this is becoming very popular.

Locate the pump onto the chosen spot ensure there is enough access to remove the pump lid and basket easy mistake

You may choose to fix the pump to the floor to help reduce vibration up the interconnecting pipe work.
 

If your plant area suffers from noise you may wish to call Deep End Pools on 01494 681835 and consider an anti vibration pad. This slips under the pump and dampens the noise and vibration transfer slightly some very good reports on these pads.

Once you have adjoined your pipe work, ensure all o rings are greased clean and completely free from grit and any intruding foreign matter.

 ALWAYS allow adequate time for glues to dry/ cure often 24hrs.

 ALWAYS fill your pump basket with a complete flood of water, clear any air and observe your installation for at least 15mins to allow any trapped air to purge and leaks become obvious, always attend any newly installed equipment over the forthcoming hours/ days mainly to be sure all is ok.Often a pump will failure will be due to another factor other than the pump itself, air being pulled in causes system to de-prime whilst the pump is in the off position. This leads to de-priming the pump then burning the pump out! Eeek

Incorrect electrical connections

Blockages in pipe runs.

We always highly advise if possible that you have your pump installed by Deep End Pools. We have experience and expertise working with all swimming pool systems and whilst an engineer is on site they can often see if there is a deeper root causing the previous pumps failure.

Installation of a pump should take between 1-3 hours when care is taken. understanding your system is paramount for further advice on understanding your system call Deep End Pools for advice

01494 681 835

sales@deependpools.co.uk

We have just managed to secure a stock of refurbished Aqua Speed pumps. The Certikin Aqua speed is suitable for both pool and spa filtration applications. 

Completely self priming.

The large capacity strainer basket has a high pressure clear screw on lid to make for ease of service and inspection.

Suitable for use in salt-water pools.

Whisper quiet operation
Large capacity strainer basket
High pressure screw fit lid
TEFC motor IP55 rated and fully CE approved
Supplied with quick coupling unions
Designed for maximum flow characteristics

These pumps have been supplied to us as they were faulty and repaired under warranty works. They come with a full 6 months parts and labour warranty. This pump is even suitable for salt water applications!

The Certikin Aqua Speed pump is a very reliable and strong pump and this will make the perfect addition to any plant room. It is an ideal up grade if your pump has seen better days but you do’ have a spare £500 in the current financial climate.

We have a stock of 3/4Hp pumps and 1Hp pumps.

If you require anymore information please call Deep End Pools 01494 681835.

The Nocchi pump is supported via Pentair water so the warranty is two years as opposed to the sta rite Ongar being one year, and very important for us a distributor the rear casing to the pump is metal this is great news as any light knocks within the plant room or even an over enthusiastic delivery driver would certainly have to go some to damage this pump!

The Nocchi swimmey pump is a direct replacement pump for the sta- rite Ongar swimming pool pump, the swimmey pump comes with the unions already pre-glued onto the body of the pump which also makes self fitting a little less stressful when compared to the Ongar being an onsite glued joint! (Room for error)

We are holding vast stock of the Nocchi for immediate dispatch same day delivery in the local area to us. The Nocchi pumps are carefully tested prior to leaving the factory this we believe is true as you are left with a 200mm tail of cable leading from the pump when packaged, unlike the Ongar.

The pump comes with o’rings and two styles of adaptors that can be fitted threaded 1.5″ and Glued 1.5″ so you can keep the left over as spares or simply discard them.

The Swimmy nocchi is a great little budget pump with a good warranty from Pentair it’s a no brainer for a Sta Rite pump replacement we can install your swimming pool pump for you in Bucks, Berks, Oxon, Herts.

For nocchi orders call 01494 671787 now

Prices from £195! In stock ready for immediate delivery!

SWIMMING POOL PUMPS

Sta Rite 5p2r Pumps Here

Click here for Pentair Swimmey Pumps

Sta Rite Onga Swimmy Nocchi Pump

Today Deep End Pools ordered a huge stock of pumps to keep up with demand for:

• 52PR sta rite pumps every size upto 1.5hp
• Euro Star Pumps from 0.5hp – 1.5hp
• Swimmy Pumps / Sta Rite Onga pumps 0.5hp – 1.5hp Pentair
• Certikin pumps various

This ensures we can keep up our current swimming pool pump demand. all pumps dispatched from deep end pools 2009 will come with a free advisory pump installation sheet

Swimming pumps from £180!  with unions!

for all you swimming pool pump needs call 01494 671787

http://www.deependpools.co.uk/shop/gbu0-catshow/poolpumps.html

Find out which pump best suits your needs today call 01494 671787

Sta Rite onga pumps in stock now! order now 01494 671787